Differences

This shows you the differences between two versions of the page.

--- auditoriumsoundsystem [2022/02/15 12:52]
matthews created
+++ auditoriumsoundsystem [2022/02/22 12:45] (current)
matthews [Specs]
@@ Line 1: / Line 1: @@
 ====== Router Setup ======
-Because
+===== Goal =====
+To provide wireless access to the sound mixer in the auditorium using an iPad.
+===== Problem =====
+  * Cell Phones use the 2.4ghz range, and once the auditorium is filled with people, the 2.4ghz band becomes overly saturated.  This causes the iPad to lose connectivity.
+  * The iPad periodically loses connectivity when a notification happens.
+===== Solution =====
+  * Install a router to create a 5ghz only network for the mixer.
+  * Secure/obscure the router using a wifi password AND a hidden SSID
+  * Test iPad connection from various points in the auditorium.
+  * Setup "Guided Access" mode for the m200 app.  This will stop the iPad from receiving notifications while connected to the mixer.
+===== Specs =====
+  * Factory reset router
+  * Set new admin router password.  (Write it down!)
+  * Set router IP address to 10.20.30.1
+  * Disable DHCP on router
+  * Disable 2.4ghz Radio on router
+  * Set 5ghz wireless name to: AHSMixer
+  * Hide SSID
+  * Wifi password:
+===== Resources =====
+  * [[https://rolandus.zendesk.com/hc/en-us/articles/208804946-M-200i-Troubleshooting-iPad-Connection-Issues|M-200i: Troubleshooting iPad Connection Issues]]
+  * [[https://rolandus.zendesk.com/hc/article_attachments/4406966542747/iPadGuidedAccessMode.pdf|Setting up Guided Access mode on the iPad]]
+  * [[http://cdn.roland.com/assets/media/pdf/m200i_manual_e03.pdf|m200i Manual]]
+  * [[https://static.roland.com/assets/media/pdf/M-200i_Remote_setup_e01.pdf|Instructions for setting up 5ghz Network - page 2]]
+  * [[https://www.sweetwater.com/sweetcare/articles/how-to-set-up-wi-fi-routers-for-digital-mixers/#|Sweetwater Guide to setting up router for mixers]]

Project Phoenix

User Tools

Site Tools

Differences

Page Tools